Learning Center

Seat covers cost money upfront. But are they worth the investment? We think so, but instead of telling you our opinion, we'll shoot it straight to you with the facts.

We'll use $297 for a set of bucket seat covers since that's what the average TigerTough bucket seat covers cost.

1. Repairs and replacements

If you keep your trucks for a while, you'll need to repair ripped-up and damaged seats to improve conditions for the driver/operator (we're looking at you, blue collar folks). It also helps with your brand image. If your crew rolls up in a truck with foam spewing out of the seat, how does that speak to your work?

We asked some customers how much they've paid to repair or replace seats. The average cost to repair or replace seats was $632.50 per seat.

Not only do you have to pay for the seat to be repaired, but there's also truck downtime you need to factor into the cost. 

If a pair of TigerTough seat covers cost you around $297 ($148.50 per cover) and an average of $632.50 to repair or replace a seat, you've saved $479 per seat.

Money saved: $479/seat

2. Increased resale value

There comes a time in every truck's life when it's ready for the next journey. And when it comes time to sell, we want you to walk away with the most money you can.

If your seats look like they lost a bar fight, and someone opens the door of that vehicle (whether it's the dealership or the next potential owner), they're greeted with an interior that looks like trash. That gives them the instant impression that the truck's had a rough life, and that's how you've taken care of the rest of the vehicle maintenance for the whole time you've owned it.

According to Kelley Blue Book, a vehicle can be in perfect condition mechanically and physically on the exterior, but if the seats are torn and busted, it drops to good.

At a minimum, having seats in excellent condition can save you hundreds of dollars when it comes time to sell.

Money saved: $285-$1457

3. Lease chargebacks

Maybe you lease your vehicles. Check into the charges you get after turning it in; it's normal for leasing companies to work in charges for seat damages.

On average, we see leasing companies charge $1,000-$1,200 for damaged seats. They'll allow some light wear, but if they deem a seat damaged, they'll charge you for the whole dang thing.

Money saved: $703

4. Detailing

We realize work trucks might not get detailed very often, but if you drive around a personal vehicle and spill a coffee inside, you'll probably want to get those seats cleaned.

So how much will a nice detail cost you?

An interior detail with deep cleaning can cost around $279. That's not terrible, but do it once and you've paid for a set of seat covers.

Check it out; we've taken a cup of coffee to a TigerTough seat cover to show you what happens:

Spoiler alert: The seat under the cover was totally unscathed. Your lap, on the other hand, might be a different story.

Money saved: $270 after two details

How much money will seat covers save you?

Depending on your situation, seat covers can save you anywhere from $270 to $1457 or more, depending on your vehicle (we based that $1457 number off 2012 Ford F150.)

But if you put them on when you first get your vehicle, they'll help you get more money for it whenever you decide to sell it.

Are seat covers worth it?

Do seat covers cost money? Yes.
Is there a range of prices? Yes.
Are they worth it? Yes. Especially if your vehicle's interior sees equipment, debris, dogs, or kids (like 90% of you reading this).

Do the research and find the best seat cover for your truck, and you'll walk away, saving money in the long run.

So does grease come out of TigerTough seat covers? The short answer is...heck yeah it does! Watch this torture test to see what we mean:

Here's what we did:

• Went to town with a grease gun on a seat cover installed in a vehicle in a TigerTough employee vehicle. 10/10 recommend for fun. 
• Smeared that grease around for good measure.
• Tried to wipe off the excess grease with a paper towel, but that just smeared it around more.
• Sprayed degreaser all over the stain.
• Scrubbed.
• Repeated steps 4 and 5.

Boom! The stain came out and the seat underneath was totally unaffected. We'd recommend washing the affected pieces in the washing machine after removing the stain, just for good measure. Normally we say to wash in cold, but if you're dealing with grease, turn that water to warm.

If you're looking to remove grease stains from upholstered seats (not seat covers) you can try these steps, but we aren't experts so don't blame us if something goes wrong. We'd suggest you clean the seat the best you can and then add seat covers to protect from any future stains.  

So, we just got our hands on a 2011 F550 that was a heavy equipment service truck.

The truck had belonged to a heavy equipment dealer. This company installs TigerTough seat covers on their trucks when they're brand new, so we were pretty excited to see how everything looked.

It was pretty clear this thing wasn't somebody's grocery-getter. Even if you ignored the service body and the crane.

But what do you expect from a service truck that's eight years old? Broken equipment is never clean and rarely easy to get to!

This truck had over 235,000+ miles on it and hadn't been touched since it was decommissioned.

But what does it look like under the covers? Are they worth the money?

We peeled the covers off to see how everything had fared over 235,000 miles of being on the road, eight years of bouncing across construction sites, and countless dirty mechanic entries and exits.

Those pictures pretty much speak for themselves, don't they?

The buyer of this truck technically could have spent a ton of time and money getting the seats shampooed. That would have taken out some of the stains.

The shampooing wouldn't have touched the wear on the edge of the seat from eight years of getting in and out, though. You don't see any because the seat covers prevented it from happening. The original owner invested a little bit in preventing a costly problem

Seems like a good idea, doesn't it?

If you operate a service truck (or a bunch of them), seat covers are a pretty cheap way to keep the inside of your truck in good shape. They're inexpensive and often overlooked, but you just see what they'll do.

Save Your Service Truck.

We get it a lot; people looking for seat covers for vehicles that we don’t cover, crazy colors, or other really custom stuff that we don’t do.

So here’s who we’re right for and who we’re not

First off, let’s start off with who we’re not right for. That way, if you’re in that category, you don’t have to waste any time.

• If you’re looking for seat covers for a passenger car, minivan, or a custom dog hammock, we’re probably not your best option.
• We’re not the right fit if you’re after seat covers featuring the logos of your favorite sports team, vehicle manufacturer, or motorcycle. While we do offer stock and custom embroidery, we don’t license copyrighted logos (it’s too expensive, and we prefer to invest that money in high-quality materials).
• If you want seat covers that are two-tone, alligator skin, or come in wild colors, we’re not the right company. Same goes if you’re looking for extra foam padding, heated covers, or similar extras.
• If you need a seat cover that can be quickly installed to take the dog to the vet or haul landscaping equipment in the backseat of your family truck, we might not be the best fit. Our seat covers take 15 minutes to install per seat and about half that time to remove. So, this one’s up to you.
• Lastly, we’re not cheap—and there are three key reasons why:
• Made in the USA: We don’t outsource our manufacturing. While we could cut labor costs by sending production elsewhere, we choose to support American workers and pay fair wages.
• Top-notch materials: We use the toughest, highest-quality materials available to ensure you get the best seat covers out there.
• Custom-fit designs: Every seat cover is designed specifically for your vehicle. That means we bring trucks to our factory and spend hours making sure each cover fits perfectly.

If we’re not right for you, no hard feelings. We’d rather you find out now than after you spent your hard-earned dough and ended up disappointed.

Now, who we ARE right for

We make seat covers for work. And by work, we’re talking blue-collar, hard work. Contractors, pest control, last-mile delivery, service trucks, and law enforcement, just to name a few industries. 

The people who use our seat covers are typically doing some of the following:

• Multiple entry/exits every day
• Getting dirty
• Wearing tools and/or weapons on their belts
• And, most often, a combination of all three

TigerTough Ironweave seat covers are made from 1000-denier CORDURA, some of the toughest material we can find to wrap around your seats. In fact, it has a higher abrasion rating than Kevlar. We use it because while it’s almost impossible to tear, it’s easy to work with, it’s water-resistant, and it’s made in the USA.

You’ll probably notice that our covers have no decorative stitching (aside from the optional embroidery, if you choose that) and very few seams. That’s because seams and stitching are the weakest points in anything sewn together. Since our customers use their vehicles as tools in their toolboxes, we’re doing everything possible to eliminate weak points.

Actually, a customer who goes by the name R00ster said it best. He’s a farmer from Virginia and says

R00ster goes on to say he throws grease guns, screwdrivers, and fencing tools (even his chain saw) on his seats and doesn’t worry about it anymore.

We build seat covers for people like R00ster. The people whose day-to-day jobs are the ones that make the lights come on, the food hit your plate, the gas come out of the pumps, and the packages show up on time. Ours are some of the best work truck seat covers on the market, and we're darn proud of that.

If you’re looking for a seat cover that isn’t luxury but most definitely is built for work, TigerTough is the best choice. 

Sgt. Chris Terrell has been using TigerTough seat covers in his fleet since 2016. See what he thinks of his experience.

Since we've been working together, he's been able to significantly reduce wear to the seats in their police interceptors rather than fixing the wear & holes they were dealing with.

Seems smart, doesn't it?

Check out Police Car Seat Covers Here.

Both. How's that for an answer?

What Are You Doing?

If you're slapping some purple, fuzzy, Tweetie Bird covers on your Camry, they're probably an accessory. Even if you're the kind of person that gets bored with a plain, boring, gray interior like everyone else has and wants to spice things up with an epic camo pattern, they're still an accessory.

When your seat covers become a part of your work truck, that's when the story changes. When your truck's covers are in place to prevent your day-to-day from tearing up the seats in your vehicle, then you can start calling them a necessity.

Construction workers, linemen, roustabouts, and roughnecks know what we're talking about. They've got work to do, they don't have time to worry about keeping their truck sparkly clean. Not when you've got some of the dirtiest, toughest jobs out there. Those fleet managers know that quality seat covers are a necessity if they want to get anything for their trucks when they're done with them.

Travis from Black Hawk Energy Services talked about it here: An Extra $3000 In Resale Value

Bryan from Anderson & Wood Construction has proved they're a necessity here: North Dakota Construction Trucks Look Like New

And Dan from the Hollis, NH Police Department would tell you they're a necessity: Here Is Why

So often, fleet managers and owners look at work truck seat covers as an accessory. They're right if they're just trying to make their trucks look cooler, but if they're committed to making their fleet as efficient and cost-effective as possible, seat covers for their work trucks are necessity

Interested in seeing if they'd help you have better equipment, happier drivers, and more money? Grab a sample and let us know what you think.

I'd Like A Sample

Construction is a tough, dirty job. When you’re a complete utilities contractor helping develop the oil fields of North Dakota, you know that all too well. Bryan, the fleet manager for Anderson & Wood Construction, knows that. That’s why he was pretty impressed when the seats in the 2014 and 2015 trucks that were being sold were in perfect condition. Because the covers had held up so well, he decided to wash and re-use the covers from their 2015 trucks on their new ones. They could have used the 2014 covers as well but they wouldn't fit on the new trucks. Take a look at the before and after pictures

Check out how dirty the seats are after five years in the field. They peeled the cover back to see what the seats looked like.

A quick vacuum job on the seats and a good cleaning of the rest of the truck. Bryan also sent a picture of a 2012 F150 that came in to sell. This picture shows the seats immediately after taking the covers off.

These tan seats haven't even been vacuumed yet.

You're looking at a 2012 F150 with 123,000 miles.

Want to preserve your truck's interior? Check out the best seat covers for trucks and find a brand that fits your needs and budget.